1. Green environmental protection paint, paint product performance indicators, safety indicators, paints that meet the technical requirements of China's environmental labeling products, escort your health.
2. The surface is sprayed with electrostatic epoxy powder, and the color can be changed according to customer requirements.
3. Design concept: The design of the hospital hall triage is to prevent the patients and their families from being injured. The stainless steel baseboard is used to prevent the touch of the feet. The design of the high and low platforms is uniform and uniform.
4. There is no supporting frame to avoid bumping the nursing staff. The matching cabinet equipped with the universal wheel can be moved freely according to the demand. The station has strong and weak point cable positioning position, and the wiring is orderly.
5. Hanging access door, can easily check the line fault problem, 360 degrees to serve patients.
6. The inside computer is embedded, which increases the privacy, and the design of the main cabinet is hollow.
7. The countertop is made of medical grade artificial stone (the main component is composite acrylic resin ≥28%+aluminum powder). Its material thickness is ≥1.2cm; easy to clean, anti-fouling, anti-penetration, impact resistance, high temperature resistance, flame retardant, no Characteristics such as poison; meet the high standard requirements of the top three hospitals.
8. The countertop is made of medical artificial stone; its material thickness is ≥1.2cm; it meets the environmental sanitation requirements of hospitals and other high standards.
9. Cabinet: Baosteel SECC double-sided electrolytic steel plate with thickness ≥0.7-1.0. At the same time, the steel plate meets the EU's RoHS non-toxic requirements. The carbon content is 41*103, the manganese content is 20*103, the phosphorus content is 21*103, the yield is 213 MPa, the tensile strength is 348 MPa, and the elongation is 39%.
10. Spraying: The surface of the steel plate is sprayed with environmentally friendly indoor epoxy resin, the thickness of the coating film is uniform, the thickness of the powder coating is 60-80um, and the process of high temperature leveling and solidification makes the spray coating corrosion resistant and resistant. The impact performance is higher than the national standard, and the coating adhesion reaches 2 levels. The surface of the powder is gorgeous
11. It has environmental protection, antibacterial, anti-rust, anti-corrosion, high insulation, strong adhesion, anti-friction and other technical characteristics according to the requirements of the hospital.
12. Spraying is sprayed on the line to avoid the influence of human factors on the processing accuracy, resulting in quality differences between products; the powder meets the EU RoHS non-toxic requirements.
13. Process: The overall resistance welding process is used, and there is no exposed solder joint.
14. The cabinet needs to be fully enclosed with a top plate to strengthen the table support. The gap between the front door and the drawer of the cabinet is between 1.0-1.5mm, and the width of the cabinet frame is 2.5cm.
15. The cabinet adopts double-layer door panel design with built-in door panel technology. The opening angle of the cabinet door reaches 90 degrees, and there are reinforcing ribs inside to improve the service life of the door.
16. The movable layer is bent on four sides, and the height can be adjusted freely. The layer hook is 2.0 thick, which can be freely disassembled and adjusted step by step. The layer rib can withstand 50KG. The hidden curling handle is used for bending and forming.
17. The base of the cabinet adopts 1.0mm SUS304 stainless steel baseboard, which is 23mm in height and 100mm high than the front end of the cabinet. It has no sense of resistance during operation and is ergonomic.
18. It consists of three drawers, main cabinet and keyboard stand. The whole section is equipped with concealed special trunking, such as: data cable, power cord, telephone line, etc., safe to use, easy to overhaul, clean up
19. The door has a built-in magnetic function, which is more closely attached to the cabinet. The door is connected by a door shaft, and the door shaft connecting piece is 4.0mm.
20. Hardware: The brand blade cam lock is used. The key has a low repetition rate and the mutual opening rate is less than 1/1000. The craftsmanship is exquisite and the appearance is beautiful.
21. The guide rail adopts DTC medical three-section ball guide, material Q235 steel strip, freely pullable, can put 45KG load weight in the drawer
22. Guide rails and hinges: imported medical grade standard guide rails, smooth, quiet, durable, anti-overturning function
1. Customized service to show your uniqueness from others.
2. 3D drawing to see more details of design, almost as live scene.
3. Company owns the factory to make the deadline, from design to production.
4. Good after-sales service, vedio or technicians for perfect installment.
1. Will it get yellow easily ?
The anti-yellow technology is industry-leading. The material is easily renewable.
2. What is the warranty?
10-years` warranty. Actually they can be used even longer.
3. Does it come with color differences?
No color differences in the same order .
4. How about the Inspection?
Inspection 4 times during the whole production. And we accept all inspection for all products .
5. What kind of packaging material do you use ?
Wooden case+Foam+Steel Strip (This packing well protect the products during sea shipping)
Customized packing is available.
6. Can you provide small samples?
Yes. We can offer free sample block for testing the quality.